Things to Know Before Buying Steel for DIY Projects

If you plan to build something yourself, you should consider various materials for your project. For example, many types of steel are available, including Aluminum, Stainless steel, Square tubes, and Corten steel. It would help if you first learned the differences between each type to decide which is best for your DIY project. Once you have selected the type of material, the next step is to determine what it is used for.

steel supplies AdelaideCorten steel

The gross look of corten steel can be a plus point if you want a rustic garden path. Corten steel can be bent into sharp 90-degree angles and used as edging. Combined with wood, it makes a rustic yet modern garden path. Raised garden beds can also be made from corten steel and look attractive without any plants. They can also be quickly emptied. So Corten steel has a lot of applications in the garden. For more about steel supplies Adelaide, see here.

Corten steel undergoes a natural rusting process, changing its colour and texture when used outdoors. It may be orange or brown, or a combination of both. Rusting can be accelerated by exposure to excessively high or low temperatures, so you should plan your project accordingly. Using Corten steel for DIY projects, you can follow a few basic steps to create a gorgeous rusted-steel look.

Stainless steel

There are some things to consider when buying stainless steel\ for DIY projects. First, the material is a relatively thin product, typically topping out at 6mm thick. It may be listed in gauge rather than millimetres and will typically be delivered in standard pre-cut sizes. You can also order custom sizes if you need them. Most stainless steel sheets will be delivered in their annealed state.


Before you go out and buy aluminium, there are a few things to know. The first is that aluminium doesn’t come in its natural colour; it’s usually black or white. But it can be treated with various chemical processes to make it look more attractive. If you’re planning to paint aluminium, you should use high-quality paint. Finally, there are several different types of aluminium available. To learn more about the types available, read on to learn how to work with them.

Before buying aluminium for DIY projects, you should know that it comes in various grades. The type of aluminium you buy depends on the project you’re planning to do. It will narrow down the list and help you choose the best grade for your project. For example, Alloy 1100 is lightweight and has excellent weldability. However, it is not usually used for high-strength or pressure applications.

Square tubes

Before purchasing square tubes for DIY projects, there are some things to consider. Using them in DIY projects requires proper preparation. The support lines need to be prepared by deburring the holes. You can do this with a drill bit more significant than the size of the hole. Another method uses a half-round file to remove the burr inside the tube. If you do not have a file, you can send a piece of coat hanger wire into a slight bend over the burr.

Non-threaded connectors

There are three basic methods for fitting non-threaded pipe into your DIY project. One method uses a straight iron connector that is completely threaded inside. The pipe end is threaded with an average amount of taper, while the other method involves cutting parallel threads on the pipe end and winding a locknut onto it. The threaded end is then sealed with tape.

Another DIY project uses SteelTek fittings. For a TV console, you can use one of the SteelTek fittings to construct a cabinet. You will need wood screws, a wooden top and shelf, and a few wood bolts. Lowe’s is also equipped to cut the pipe for you if you purchase a solid thread-less pipe. After you have purchased it, you can start building the project.


DIY projects that require steel plates will choose aluminium as they are lightweight and excellent in electrical and thermal conductivity. While they are not as strong as stainless steel, they are ideal for home repairing projects. They are also less expensive than carbon steel, the most popular choice for home DIY projects. Carbon steel is much less expensive than stainless steel but more susceptible to breaking. The following are some of the costs associated with steel.

A ton of raw steel will cost you $400. Fabrication costs are approximately three times the material cost. So, a ton of fabricated sheet metal can easily cost $1,600. You can save a few hundred dollars by using prefabricated metal or hiring a metal fabricator. But, if you are not confident with your skills, you can use an experienced metal fabricator instead. The latter will make the process of transforming steel easier.